Menu hierarchy and number reference
Press the lower dial to open the menu. This page lists the on-screen item names and numbers at each level.
How to read the list and use the menu
3-1-1 means navigating through menu items “3 → 1 → 1”. Do not enter the digits as a single number: select and confirm an item at each level.
| Control | Action |
|---|---|
| Turn the lower dial | Select an item |
Press the lower dial / press the button shown as OK on the screen |
Confirm and go to the next level |
| Press the number button indicated on the screen | Select that numbered item (confirmation is a separate action) |
Press the buttons shown as − / ＋ on the screen |
Change the selected setting |
Press the button shown as Back on the screen |
Go back one level |
Press the button shown as Exit on the screen |
Close the menu |
The number button 0 selects item 10. Button functions may change on file-selection screens and elsewhere. Follow the on-screen labels.
When numbers change
Menu item 1 depends on the part selected before opening the menu. If items are hidden because of the beat type or external input setting, subsequent items move up in the numbering.
Main menu
| Number | Label | Function |
|---|---|---|
| 1 | Depends on the part | See “Item 1 by part” below |
| 2 | Project |
Save/load the performance state and record the full performance |
| 3 | Music |
Tempo, key/scale, and track playback |
| 4 | Rec |
Settings, export, and clearing for recorded performances |
| 5 | External Device |
External controller settings |
| 6 | Wi-Fi |
Updates, Wi-Fi connection, and File Editor |
| 7 | System |
Device settings, information, and reset |
Item 1 by part
| Selected part | Menu item 1 | Reference |
|---|---|---|
SAMPLER |
Sample |
Sample kit |
BEAT |
Beat |
Beat |
BASS |
Bass |
Bass |
MELODY |
Melody |
Melody |
CHORD |
Chord |
Chord |
MUSIC |
Music Track |
Track playback |
The MUSIC part appears only when a track is loaded. Items 2–7 are shared by all parts.
1. Part-specific menus
Sample kit: Sample
Open the menu with the SAMPLER part selected, then choose item 1. The screen heading is Sample Kit.
| Number | Label | Function |
|---|---|---|
| 1-1 | Volume |
Sampler part volume |
| 1-2 | Load Sample Kit |
Load a sample kit |
| 1-3 | Save Sample Kit |
Save a sample kit |
| 1-4 | Import Sample |
Select a sound and assign it to a pad |
| 1-5 | File Editor |
Manage files in a browser |
| 1-6 | New Kit |
Start a new, empty kit |
| 1-7 | Reset Kit |
Restore the Default Kit or built-in kit |
Related: Add samples / Projects and sample kits
Beat: Beat
Open the menu with the BEAT part selected, then choose item 1.
Pattern beats show Select Kit and Pattern. Audio beats do not show these two items, so the numbers for volume and subsequent items differ.
| Pattern beat number | Audio beat number | Label | Function |
|---|---|---|---|
| 1-1 | 1-1 | Select Beat |
Select a beat source |
| 1-2 | — | Select Kit |
Select a drum sound set |
| 1-3 | — | Pattern |
Change pattern density or clear it |
| 1-4 | 1-2 | Beat Volume |
Beat volume |
| 1-5 | 1-3 | Beat Repeat |
Number of beat repetitions that make up the Loop length |
| 1-6 | 1-4 | File Editor |
Manage files in a browser |
Under Select Beat
| Number | Label | Function |
|---|---|---|
| 1-1-1 | Built-in |
Select a built-in beat |
| 1-1-2 | SD Card |
Select a beat from the SD card |
| 1-1-3 | Sampler Pad |
Create a beat from a pad sample |
Under Select Kit (pattern beats only)
| Number | Label |
|---|---|
| 1-2-1 | Acoustic |
| 1-2-2 | Dance |
| 1-2-3 | Chiptune |
Under Pattern (pattern beats only)
| Number | Label | Function |
|---|---|---|
| 1-3-1 | Pattern Half |
Halve the pattern density without changing tempo |
| 1-3-2 | Pattern Double |
Double the pattern density without changing tempo |
| 1-3-3 | Clear Pattern |
Clear the pattern's performance data |
Related: Choose a beat / Adjust beats and timing
Bass and melody: Bass / Melody
Open the menu with the BASS or MELODY part selected, then choose item 1. Both share the same items and numbers.
| Number | Label | Function |
|---|---|---|
| 1-1 | Sound Source |
Select a sound source (see sound source selection below) |
| 1-2 | Octave |
Playing range |
| 1-3 | Pitch Bend |
Pitch change range for the lever |
| 1-4 | Volume |
Volume of that part |
Chord: Chord
Open the menu with the CHORD part selected, then choose item 1.
| Number | Label | Function |
|---|---|---|
| 1-1 | Sound Source |
Select a sound source (see sound source selection below) |
| 1-2 | Octave |
Playing range |
| 1-3 | Volume |
Chord part volume |
Sound source selection hierarchy (shared by all three parts)
| Number | Label | Function |
|---|---|---|
| 1-1 | Sound Source |
Select a sound source |
| 1-1-1 | ↳ General MIDI |
Use the built-in MIDI sound source |
| 1-1-1-1 | ↳ ↳ Tone |
Select a tone |
| 1-1-2 | ↳ Pad |
Use a pad sample as the sound source |
| 1-1-2-1 | ↳ ↳ Pad Sound |
Select the source pad |
| 1-1-2-2 | ↳ ↳ Pad Base Note |
Set the original sample's base note |
For example, the number for Pad Base Note is 1-1-2-2 in all three parts.
Related: Play the music parts / Turn a sample into an instrument
Track playback: Music Track
Open this from item 1 in the MUSIC part, or from 3 Music → 3 Music Track in the shared menu. The table below shows the numbers after opening it.
| Number at this level | Label | Function |
|---|---|---|
| 1 | Track Volume |
Track volume |
| 2 | Load Music |
Load a track |
| 3 | Play / Pause |
Play or pause |
| 4 | Rewind 10 sec |
Skip back 10 seconds |
| 5 | Forward 10 sec |
Skip forward 10 seconds |
| 6 | Stop |
Stop playback |
| 7 | Remove Music |
Remove the current track from the performance state |
| 8 | File Editor |
Manage files in a browser |
For example, open Load Music with 1-2 from the MUSIC part, or with 3-3-2 from any part.
Related: Play along with a track
2. Project
| Number | Label | Function |
|---|---|---|
| 2-1 | Load |
Load a Project |
| 2-2 | Save |
Save a Project |
| 2-3 | Performance Recording |
Settings for recording the full performance as WAV |
| 2-4 | File Editor |
Manage files in a browser |
| 2-5 | Clear Project |
Reset the current performance state |
Related: Save and load / Record the full performance as WAV
3. Music
These music settings are shared by all parts. You can open them even if no track is loaded.
| Number | Label | Function |
|---|---|---|
| 3-1 | Tempo |
Tempo, Swing, and recording grid resolution |
| 3-1-1 | ↳ Change Tempo |
Tempo adjustment controls |
| 3-1-1-1 | ↳ ↳ Tap Tempo |
Set the tempo by tapping pads or using the dial |
| 3-1-1-2 | ↳ ↳ Tempo Half |
Halve playback speed |
| 3-1-1-3 | ↳ ↳ Tempo Double |
Double playback speed |
| 3-1-2 | ↳ Swing |
Rhythmic swing |
| 3-1-3 | ↳ Note Grid |
Timing resolution for recording performances |
| 3-2 | Key / Scale |
Shared scale settings |
| 3-2-1 | ↳ Key |
Key of the song |
| 3-2-2 | ↳ Scale |
Scale |
| 3-2-3 | ↳ Tuning |
Reference pitch |
| 3-3 | Music Track |
Track playback menu |
Related: Beats and timing / Music parts
4. Rec
| Number | Label | Function |
|---|---|---|
| 4-1 | Quantize |
Align performance timing to the Grid |
| 4-2 | Save as Beat |
Export the beat and performance recorded into Rec as one WAV |
| 4-3 | Clear Rec |
Clear the performance recorded into Rec |
Related: Record performances into Rec / Export as a beat
5. External Device
BLE MIDI Connection appears only when Input Source is set to BLE MIDI.
| Normal number | Number when using BLE MIDI | Label | Function |
|---|---|---|---|
| 5-1 | 5-1 | Input Source |
Select an external input |
| 5-2 | 5-2 | MIDI Note Action |
Choose whether MIDI Note is used for playing or controlling |
| 5-3 | 5-3 | Input Assign |
Assign device controls to external inputs |
| — | 5-4 | BLE MIDI Connection |
Connect a Bluetooth MIDI device |
| 5-4 | 5-5 | Device Info |
Show connection status |
Under Input Source
| Number | Label |
|---|---|
| 5-1-1 | Off |
| 5-1-2 | USB MIDI Controller |
| 5-1-3 | USB MIDI Computer |
| 5-1-4 | USB Keyboard |
| 5-1-5 | BLE MIDI |
| 5-1-6 | USB Gamepad |
Under Input Assign
| Number | Label | Function |
|---|---|---|
| 5-3-1 | Learn |
Match an external input to a device control |
| 5-3-2 | Assign List |
Review assignments or delete them individually |
| 5-3-3 | Clear All |
Clear all assignments |
Under BLE MIDI Connection (BLE MIDI only)
| Number | Label | Function |
|---|---|---|
| 5-4-1 | Scan & Connect |
Find and connect a device |
| 5-4-2 | Forget Device |
Forget a saved connection |
| 5-4-3 | Reset BLE Connection |
Reinitialize the BLE connection |
Related: Use external controllers
6. Wi-Fi
| Number | Label | Function |
|---|---|---|
| 6-1 | Update |
Update the firmware |
| 6-2 | Wi-Fi Setup |
Set up the Wi-Fi connection |
| 6-2-1 | ↳ Use Smartphone |
Set up the connection from a smartphone |
| 6-2-2 | ↳ WPS |
Connect using the router's WPS |
| 6-3 | File Editor |
Manage files in a browser |
| 6-4 | Auto Update |
Automatic update settings |
| 6-5 | Wi-Fi Info |
Show Wi-Fi connection information |
Related: Wi-Fi and Update / File Editor
7. System
| Number | Label | Function |
|---|---|---|
| 7-1 | Recording Input |
Select the sample recording input |
| 7-2 | Menu Sound |
Turn menu sounds ON / OFF |
| 7-3 | Display |
Screen brightness |
| 7-4 | LED |
Pad LED brightness |
| 7-5 | Language |
Display language |
| 7-6 | Info |
Device and firmware information |
| 7-7 | Reset All |
Reset sampler settings |
Related: System settings and Reset
Before clearing or resetting
New Kit, Clear Project, Clear Rec, Clear Pattern, Clear All, Reset All, and similar commands clear or reset current content. First save any performance state you need as a Project or sample kit.
Selection screens for files, tones, and other items
Files to load, tones, pads, BLE devices, and similar items appear on selection screens opened from the fixed menus above. Their item numbers depend on file contents and connection status, so this page does not list fixed numbers for them.
Import Sample: category → sound → destination padSelect Beat: built-in or SD card options, or the source padLoad/Load Sample Kit/Load Music: file listSave/Save Sample Kit: save destination optionsTone/Pad Sound/Pad Base Note: lists of tones, pads, or base notesScan & Connect: detected BLE MIDI devices → connection confirmationAssign List: list of saved assignments
If the display differs with your device version, follow the item names shown on the actual screen.